How do you change the oil on a 2010 Ford Escape

Raise the front with ramps or a jack and jack stands.Remove the under engine trim panel.Remove the drain plug and drain oil.Re-install drain plug.Remove and replace oil filter.Refill with fresh oil and check for leaks.Replace all removed components and reset service light.

What size is the oil drain plug on a 2010 Ford Escape?

Dorman – Help – Oil Drain Plug Pilot Point M14-1.50, Head Size 16mm (Part No. 69010)

Where is the oil filter on a 2010 Ford Escape v6?

If You’re looking for the oil filter on the 2010 Ford Escape, You’ll be pleased to find out that it’s easily accessible. The oil filter on the Escape is located right next to the oil pan. If You want to see it directly, go ahead and look right under the front of the vehicle.

How much oil does a 2010 Escape take?

The 2010 Ford Escape has an engine oil capacity of 5.3 qt and 6.0 qt for the 2.5L and 6.0L engines, respectively.

How do you change the oil on a ford escape?

Raise the front with ramps or a jack and jack stands.
Remove the under engine trim panel.
Remove the drain plug and drain oil.
Re-install drain plug.
Remove and replace oil filter.
Refill with fresh oil and check for leaks.
Replace all removed components and reset service light.

What size bolt is on an oil pan Ford Escape?

All plugs have 14mm hex – just one wrench works for all.

What size is the oil drain plug on a ford escape?

Dorman – Autograde – Oil Drain Plug Pilot Point M14-1.50, Head Size 16mm (Part No. 090-053CD)

What type of oil do you use in a 2010 Ford Escape?

Mobil 1 Extended Performance Synthetic Motor Oil 5W-20 5 Quart.

What size is the oil drain plug on a 2011 Ford Escape?

Dorman – Autograde – Oil Drain Plug Pilot Point M14-1.50, Head Size 13mm (Part No. 090-938CD)

What kind of oil does my 2010 Ford Escape use?

The 2010 Ford Escape 2.0L engine oil capacity requires 4.5 quarts. Ford approved engine oil for the 2010 Ford Escape is the SAE 5W-20.

Article first time published on

What kind of oil does Ford Escape take?

For the ford escape it is recommended to use 5w-20 or 5w-30 synthetic motor oil.

Where is the oil filter on a 2011 Ford Escape?

The oil filter in a 2011 Ford Escape can be found at the oil pan near the front of the vehicle. This is a standard metal filter that threads onto the underside of the engine. Whenever You change the oil in Your Escape You should also make sure to change the filter out.

How often does a Ford Escape need an oil change?

How often does a Ford Escape need an Oil Change? An oil change is one of the most prime and necessary services for your car. Synthetic oil usually should be interchanged every 7,500 – 10,000 miles. Ford recommends getting your Ford Escape oil & filter interchanged every 3,000-5,000 miles for conventional oil.

Will my Ford Escape tell me when to change oil?

Your Ford Escape may come equipped with an Intelligent Oil-Life Monitor system that helps determine when it’s time for an oil change based on a number of conditions that affect the quality of the oil over time.

How many quarts of oil does a 2009 Ford Escape take?

Capacity: 6 quarts. . . . (with filter)After refill check oil level.

What size is the oil drain plug on a 2008 Ford Escape?

Dorman – Autograde – Oil Drain Plug Pilot Point M14-1.50, Head Size 16mm (Part No. 090-053CD)

How much oil does a 2008 Ford Escape take?

6 quarts. . . . (with filter)After refill check oil level.

How much oil does a 2012 Ford Escape take?

5.3 quarts. . . . (with filter)After refill check oil level.

How many Litres of oil does a Ford Escape need?

If You don’t replace it, there will be problems with the engine. The ford escape v6 oil capacity is 5.2 Liters or 5.5 Quarts. Ford recommends using sae5w-20.

What kind of oil does a 2009 Ford Escape take?

The SAE classification 5W-20 is the best engine oil for the 2009 Ford Escape. The 2009 Ford Escape engine oil capacity is 2.0L 4.5 US quarts.

Where is the oil filter located on a 2008 Ford Escape?

The oil filter in the Ford Escape is behind the front bumper, juSTSlightly off-center on the passenger side. It is close to the oil pan. You will need to use jack stands to access the filter and drain plug. Ford recommends changing the oil in this vehicle every 7,500 miles, so You can have the filter changed then.

How do I change my own oil?

Step 1: Jack It Up, Open It Up. …
Step 2: Unplug It, Drain It. …
Step 3: Off With the Old Filter. …
Step 4: Drain Plug in, Filter On. …
Step 5: Fill It Back Up with Oil. …
Step 6: Check the Oil Level, Check for Leaks.

What kind of oil does a 2011 Ford Escape take?

Mobil 1 Extended Performance Synthetic Motor Oil 5W-20 5 Quart.

How much oil does a 2011 Ford Escape take?

Engine Oil 5.3 quarts. . . . (with filter)After refill check oil level.

How much transmission fluid does a 2010 Ford Escape take?

The 2010 Ford Escape uses 9.0 qt of transmission fluid for those with automatic transmission, and 2.4 qt for those models paired with a manual transmission.

Can 5w30 be used instead of 5w20?

Can You Use 5w30 Instead Of 5w20. It is not recommended. Although they both have the same winter rating of 5, the thickness (viscosity) of 5w30 is a bit higher than 5w20. That means your engine’s at stake for using the high viscosity oil.

What synthetic oil does Ford recommend?

what brand of oil does ford recommend? Ford recommends their OEM Motorcraft SAE 5W30 Synthetic Blend Motor Oil.

Does synthetic oil contain oil?

Synthetic oil is a man-made lubricant that consists of artificially made chemical compounds. Synthetic oils are typically created from chemically modified materials such as petroleum components, but the base material is almost always distilled crude oil.

What is the oil dipstick?

With the engine off, open the car’s hood and find the dipstick. Pull the dipstick out from the engine and wipe any oil off from its end. … The dipstick shows the oil is low and needs to be topped off. Consumer Reports. Pull it back out, and this time look at both sides of the dipstick to see where the oil is on the end.