How do you reset the maintenance light on a 2009 Volvo c70

Press and hold trip reset button,turn on the ignition,wait for the yellow warning light to start blinking,release the button and wait for confirmations sound,turn off the ignition,turn the ignition back on to check if the service message is gone.

How do you reset the maintenance light on a Volvo C70?

1. Press and hold trip reset button,
2. turn on the ignition,
3. wait for the yellow warning light to start blinking,
4. release the button and wait for confirmations sound,
5. turn off the ignition,
6. turn the ignition back on to check if the service message is gone.

How do you turn off the maintenance light on a Volvo?

Press and hold the trip computer while turning your key to position two. The center arrow will flash red three times. On the third flash, you will let go and an alert will note that you just reset your service light.

How do you reset the maintenance light on a 2009 Volvo?

1. Turn ignition switch to position I.
2. Press and hold the odometer reset button.
3. Turn ignition switch to position II.
4. After Service light flashes, release odometer reset button.
5. Turn ignition off.
6. Turn ignition back on to confirm reset.

How do you reset the oil light on a 2012 Volvo C70?

1. Turn the ignition switch to position I (ACC)
2. Press and hold the OK button on the turn signal arm.
3. Continue to hold OK button and turn the ignition switch to position II (RUN)
4. Wait about 10 seconds and release the button once the information light begins to flash.

How do you reset the maintenance light on a 2010 Volvo XC60?

1. Turn ignition switch to position I.
2. Press and hold the trip odometer reset button.
3. Turn ignition switch to position II, while continuing to press trip odometer reset button.
4. Wait for 10 seconds.
5. Release the reset button when the information lamp starts to flash.

How do you reset the maintenance light on a 2008 Volvo c70?

Press and hold the trip 1 reset button (yellow arrow in picture). Wait for the odometer to set to zero. Step 3. With the trip reset button still pressed, turn the key to position 2.

How do you turn off the maintenance light on a Volvo XC90?

1. Insert the key into the ignition. Press and hold the trip odometer reset button.
2. Turn the ignition on without starting the engine. …
3. Release the trip odometer reset button when the service light starts to flash.

How do you turn off the maintenance light on a Volvo XC70?

1. Turn ignition switch to position I.
2. Press and hold the trip odometer reset button.
3. Turn ignition switch to position II, while continuing to press trip odometer reset button.
4. Wait for 10 seconds.
5. Release the reset button when the information lamp starts to flash.

How do you reset the maintenance light on a Volvo S40?

1. Press in the trip odometer reset knob. Hold the knob down.
2. Turn the ignition switch to the “II” position. Do not start the engine.
3. Hold the odometer knob down for about 30 seconds until the maintenance light blinks. Release the trip odometer knob.

Article first time published on

How do you turn off the service light on a Volvo S40?

1. Hold down the odometer button.
2. Turn the ignition so all the lights come on.
3. Keep holding the odometer down for 30 secs or until the service light starts flashing.
4. Release the odometer button.

How do you reset the check engine light on a 2007 Volvo S40?

Turn the Volvo’s ignition key to the “II” position in the ignition. Wait for the light on the diagnostic tool to stop flashing. The codes on your Volvo’s electronic control unit should be cleared at this point and the check engine light will reset itself.

How do you reset the maintenance time on a Volvo s60?

1. Put key into ignition. …
2. Press and hold trip reset or T1/T2 button on the instrument cluster. …
3. Turn key into II position while still holding the trip reset button. …
4. Wait until yellow indicator starts to blink. …
5. While the yellow indicator is blinking, release the button.

How do you reset the maintenance light on a 2007 Volvo xc90?

1. To reset the Time For Regular Maintenance Warning, press and HOLD the Trip Odometer button.
2. While holding the button in, switch the ignition to the ON position without starting the engine.
3. When the Triangle Warning starts flashing, you will hear a BEEP, then let go of the trip odometer button.

How do you reset the maintenance light on a 2011 Volvo XC60?

1. Turn the ignition switch to position I (ACC)
2. Press and hold the OK button on the turn signal arm.
3. Continue to hold OK button and turn the ignition switch to position II (RUN)
4. Wait about 10 seconds and release the button once the information light begins to flash.

How do I reset my Volvo on Call service required?

1. Tap the tab on the upper edge of the display (you will see Settings or Owner’s Manual)
2. Select Settings.
3. Select System.
4. Select Global Reset.
5. Select Factory Reset.
6. Select OK.