On average, the cost to refinish a deck is between $3 and $6.80 per square foot. Since a standard deck measures about 200 square feet, a refinishing project will cost about $600 to $1,360 or $975 on average.
How much should I pay to have my deck stained?
The cost to stain your deck typically ranges from $540 to $1,050 with an average of just over $700. This equates to an average cost of $2 to $4 per square foot for labor and materials. Higher-quality stains will run up the price, as will washing or sealing the wood prior to staining.
Can you Restain a deck over old stain?
Yes, it is possible to stain over the existing stain on a deck. It is recommended to do this at least once every 5-15 years, depending on how worn your deck is.
How much does it cost to stain a 12x12 deck?
A 12×12 deck costs $226 to $582 to stain when paying someone, or $59 to $176 to stain it yourself. A gallon of stain costs $20 to $50, which covers 200 to 300 square feet. Get free estimates from deck staining companies near you or view our deck stain cost calculator below.How much does it cost to powerwash and stain a deck?
The average cost to power wash and stain a deck is $2.15 to $4.25 per square foot. Deck painting cost is slightly lower. Total cost is $415 to $925 for decks of average size when a contractor is hired to do the work.
Should I power wash my deck before staining?
There is a common misconception that just pressure washing a deck prior to staining is all you need to do in order to prep your deck for stain. Pressure washing can help, but if you want your stain to last, using a good deck cleaner and brightener on the deck prior to pressure washing will provide you the best result.
How much does it cost to stain a 10 x10 deck?
A 10’x10′ deck covers 100 square feet, with a typical staining cost of $300. A 12’x12′ deck covers 144 square feet, costing an average of $432. 8’x10′ works out at 80 square feet, with a final cost of $240. A deck measuring 10’x20′ covers 200 square feet for a typical cost of $600.
How do I bid a stain job?
Multiply the hourly rate by the estimated length of the project. This is your total labor cost. Add the total materials cost to the total labor cost. The resulting number is your bid for the job.Is it cheaper to paint or stain a deck?
Stain is more budget-friendly. Stain runs between $20 and $35 per gallon, while exterior paint suitable for decking ranges from $30 to as much as $60 per gallon. Plus, if painting, you’ll have to factor in an extra $15 to $40 per gallon of wood preservative and $15 to $30 per gallon of primer.
How many hours does it take to stain a deck?While having dry conditions is the best way to ensure you project finishes quickly there are stains that can be applied to a wet surface and dry in 8-12 hours.
Article first time published onCan you power wash stain off a deck?
Pressure washing is a quick way to remove a deck finish, but it requires some care so as not to damage the deck. A pressure setting of 1500 psi should be strong enough to clean away deck stain. Hold the sprayer about 3 inches off the surface and move the sprayer as you work in the same direction as the grain.
Do I need to strip old stain before restaining?
Removing the old stain before reapplying a new coat isn’t always necessary. If you are applying the same color and brand to the wood, you shouldn’t have to strip the old stain. Using a quality deck cleaner should be all you have to do before reapplying the same stain.
Do you have to remove all old stain before restaining a deck?
You don’t need to remove all of the old stain to apply darker stain. But you do need to remove all of the lacquer, varnish or anything that will prevent new stain from absorbing into the wood. … Your sanding block will initially glide over the old lacquer before it begins to cut into it and remove it.
How much does it cost to repaint a deck?
The cost to paint a deck ranges from $600 to $1,500 or about $2 to $5 per square foot. Painting a 300 square foot surface is $1,050 on average, but many factors can increase the price. The labor rate, material condition, and paint quality, for example, can all drive up the total.
Should I seal or stain my deck?
Sealing a deck is best for cedar, teak, mahogany, or other quality woods as it enhances the wood grain and natural color. … Staining a deck protects the wood from mold, mildew, moisture, and rot, and UV rays and sun damage. The stain is available in transparent, semi-transparent, semi-opaque, and solid colors.
Is it too late to stain my deck?
Months to Weather New Wood: 2-3 Months for Transparent and Semi-Transparent colors. 12 months for Semi-Solid Colors. Number of Coats Applied to New wood: 1 Coat is suggested if the wood is under 12 months old. Restore-A-Deck Wood Stain can be applied to dry or damp wood.
How much does labor cost to build a deck?
Labor Cost to Build a Deck. Labor makes up about half of the cost with most pros charging from $15 to $35 per square foot. For an average 300 to 400 square foot deck, you’ll pay roughly $4,500 to $14,000 for labor alone.
How long does deck stain last?
The best stains should last three to five years on a deck, and even longer if applied to siding or fences, which don’t get as much abuse. “The sun and water beat down on a deck, snow can pile up, and even dirt and mildew spores can settle on the flat surface,” says Rico de Paz, Consumer Reports’ wood stain tester.
How do you prepare a weathered deck for staining?
- Thoroughly sweep the deck to remove all leaves and other debris.
- Liberally apply cleaner using a roller or pump sprayer (wear protective equipment to avoid contact with skin and eyes). …
- After 15 minutes, work the cleaner into the surface using a stiff synthetic-bristle brush.
What happens if it rains on my newly stained deck?
Splotchy Appearance If it rains within 48 hours after you apply the stain, the water will soak into the wood pores and try to displace the stain. This will result in a splotchy surface rather than an even tone. If it rains right after you apply the stain, the stain will peel and flake off.
Do I need to sand my old deck before staining?
Once dry, these wood fibers can remain raised and may cause splinters. For this reason, light but thoroughly sanding your wood deck is a necessary step before staining or sealing. This crucial step will ensure that your refinishing job gives great results.
How can I make my deck stain last longer?
The easiest and most effective way to prevent your deck stain from peeling is to go over your deck with a proper sealant. Deck sealers essentially waterproof your deck, keeping moisture from contacting the surface directly.
How many times can you stain wood?
The general rule of thumb is to apply only as much deck stain as the wood can absorb. Typically this will be 2 coats, unless your dealing with extremely dense hardwoods which may only be able to absorb 1 coat of wood stain. Watch this video to see more tips on how many coats of stain to apply.
How much should I pay someone to stain my fence?
The price of having a professional paint or stain your fence averages $2,000. Homeowners could pay anywhere between $750 to $4,250 depending on the condition, height and length of the fence. Costs average $3 to $17 per linear foot or $1 to $2.50 per square foot.
How do you bid staining a deck?
- Measure the length and width of each section of the deck. …
- Consider the cost of the deck stain in regards to how much stain you require for the project. …
- Determine the cost to clean and repair the deck before staining. …
- Estimate the amount of time you require to clean and stain the deck.
What is the best time of year to stain a deck?
The best time to stain your deck is either the spring or the fall. If you stain your deck in the summer, make sure you do it out of the direct sunlight. Applying a deck stain in direct sun will cause the stain to dry to quickly and can result in premature stain failure.
How soon can I walk on my deck after staining?
In most cases a full body stain or acrylic deck finish will be dry to touch within an hour in dry, hot weather. After two hours you could take a chance and walk on it with shoes, though I’d recommend barefoot. After about 4 hours you should be able to safely walk on your deck.
Why is my deck sticky after staining?
“A sticky or tacky deck is usually due to over-application or failing to wipe the excess stain from the surface of the wood. … Rinse thoroughly with a garden hose and spray nozzle, and let the wood dry. This removes any tackiness or residue.”
Why did my deck stain peel?
Deck stains will generally peel for two basic reasons: over application and poor adhesion. This is simple — too much stain on the surface of the wood. … If there is too much stain, it restricts the moisture from evaporating away, so peeling can occur.
Is it better to sand or power wash a deck?
DO sand your deck before sealing. At that point, lightly sand the surface to remove splintery or fuzzy patches caused by pressure-washing the deck. A pole sander with 80-grit sandpaper will suffice; a power sander is overkill. Then seal the deck to protect from cracking, cupping, and warping.
Can you apply new stain over old stain?
1. Staining over stain is easy and works beautifully if your applying a dark stain over a lighter stain on raw wood. 2. You can mix 2 or more stains together to make DIY custom stains.
