How thick are cedar fence boards

Our fence boards are full 3/4″ thick. This thicker board means less resistance to splitting and twisting, and older slow growth boards have a tighter grain to prevent shrinkage.

How thick should fence boards be?

Pickets come in a variety of thicknesses, but the most common is 5/8” thick. Full 1” thick pickets are considered premium, while ½” thick is a more economical choice. Widths are typically 3-1/2” or 5-1/2” and height is typically 42” or 72”.

How thick should cedar pickets be?

The Pickets: (The Western Red Cedar pickets are 5/8″ in thickness. The width may vary from 5 1/2″ to 6″.

What size are cedar fence boards?

The most common sizes of cedar fence rails are 2″ x 4″ and 2″ x 6″ (See below).

How thick is a privacy fence board?

How Thick Is a Fence Picket? At Discount Fence USA, we use (actual size) ¾” and ⅝” thick wood for our fence boards (pickets). These boards are often referred to as 1x6x6’s and are the standard size used by almost every fence company.

Is pine or cedar better for a fence?

Cedar is generally regarded as the stronger and more durable of these two woods. It does not need any special treatment and stands up well to the elements, with a low risk of warping and shrinking. Pine, on the other hand, is more at risk of buckling, warping, and shrinking.

How thick are cedar fence pickets?

All lengths are 3/4 inches thick or more of dense wood.

What is #2 Cedar?

#2 grade cedar will have many small knots and also large knots and blemishes. No matter what type of fence you have installed, you should expect to see minor imperfections and blemishes which will not affect the quality of the fence.

What is the actual size of a 1x6 fence board?

Actual Thickness (in)1.00Actual Length (ft)6.00Actual Width (in)6.00Common Length In Feet6-ftIndustry Standard Minimum Length (ft)6.00

Are there different grades of cedar fencing?

First, there are two different grading systems for Cedar: Structural Grade and Appearance Grade.

Article first time published on

Which fence picket is best?

Redwood is arguably the most extensively used type of wood for wood fencing and even though it comes at a high cost, redwood’s quality, durability, and aesthetic value make it among the best options.

Is Japanese cedar as good as Western red cedar?

Japanese Cedar- A newer product on the market in the US that shows promise as being a quality, lower cost alternative to Western Red Cedar. However, the pickets are thinner and less sturdy than Western Red Cedar, and have a tendency to split or break during installation.

How many cedar pickets are in a pallet?

x 5-1/2 in. x 6 ft. Premium Select Quality Japanese Red Cedar Fence Pickets Dog-Ear, Full Pallet (560-Pickets)

What size is a standard fence board?

Typically, pickets are 3 1/2″ wide, 5 1/2″ or as much as 11 1/2″ wide, if you are going to use dimensional kiln-dried lumber. This includes most treated pine boards. We use CCA treated or red cedar boards. The red cedar that we use is a full 6″ wide.

Can you get 4 ft wide fence panels?

The standard size of fence panels is 6 foot wide which is about 1.8M wide. … four foot fence panels or 1.2M (sold as 6×4)

How wide are fence panels?

Fence panels come in a standard width of 6 feet. Heights include 3ft, 4ft, 5ft and 6ft. Trellis panels also come in 1ft and 2ft heights, ideal for fence toppers, planter trellis and wall trellis. 3 foot and 4 foot fence panels are most commonly used for low level fencing such as a front garden boundary.

How wide is a cedar fence picket?

It stands 8-ft tall and the pickets are 7.5-in wide.

What is #3 cedar?

Inland cedar is usually described as #3 or better grade in STK (select tight knot). Inland cedar’s lighter coloring and displays of character make this variety ideal for knotty ceilings, paneling, and flooring.

What is a board on board fence?

Board on board fencing is constructed with an overlapping pattern of vertical pickets where every other board is attached to the opposite side of the fence rails, creating a gap in the fence. … If security is important to you, a board on board fence with a locked gate affords you the security you need.

Are cedar fences worth it?

Cedar Wood Fences It’s non-toxic and insect resistance. It’s stable, and it doesn’t shrink, splinter, or warp, which makes it the perfect wood for building fences. Cedar truly stands the test of time, and maintains its look for decades. Cedar fence posts, though, aren’t as durable against soil as PTP is.

Does a cedar fence need to be sealed?

If cared for properly, a cedar fence will remain attractive and structurally sound for many years to come. Apply a waterproofing sealer to the cedar fence to protect the wood from splintering, cracking and warping due to the weather elements. … Seal your cedar fence every three to five years.

How long will a cedar fence last?

Cedar. Cedar is one of the most durable and long-lasting woods, making it much more suitable as a material for fencing. It can last for more than 15 to 30 years and is exceptionally sustainable. Cedar wood requires much less maintenance and won’t weather as easily as spruce or pine.

What does a 1x6 actually measure?

A 1×6, for example, actually measures 3/4″ x 5 1/2″. In this case, the planing is necessary for a smoother surface, so that the board could be used for interior applications. The length of the boards is generally exactly what you order, though we usually only stock pieces of even lengths.

How thick is a 1x6?

Nominal SizeActual Size1 x 43/4 x 3 1/2 inches (19 x 89 mm)1 x 53/4 x 4 1/2 inches (19 x 114 mm)1 x 63/4 x 5 1/2 inches (19 x 140 mm)1 x 83/4 x 7 1/4 inches (19 x 184 mm)

What lengths do 6x6 posts come in?

Our 6×6 post caps come in nominal size fitting 5.5″ x 5.5″ up to 5.75” x 5.75″ and true size fitting 6” x 6″ up to 6.25” x 6.25″.

What is Grade A cedar?

The Western Red Cedar Lumber Association describes this grade as permitting somewhat more imperfections than Clear Heart but still restricted to pieces with excellent appearance.

Does cedar fencing have knots?

It is 99% knot free. The 1% may be one knot about the size of a #2 pencil eraser. Very small, hardly noticeable, and never causes any problems. Clear Cedar is only available at wholesale fence supplies.

How can you tell the difference between red and yellow cedar?

Redcedar branches have an upward lift at the end of the branches, forming a ‘J’-shape, while yellow-cedars branches droop downwards. Yellow-cedar leaves emit an unpleasant smell like mildew when crushed, as opposed to the traditional and pleasant ‘cedar’ smell of redcedar.

Does cedar wood have knots?

Cedar is naturally resistant to termites and rot. … Tight knot cedar have knots in the wood, but they are intact and there are no holes. Clear cedar do not have any knots or holes, have a nice grain to it, and could be used to give your project a nice, finished look.

Which is stronger redwood or cedar?

Redwood – with a janka rating of 450lbs – is about 23% stronger than cedar (janka rating of 350lbs). Whether or not the extra strength is necessary for your project is up to you, but clearly redwood is more durable and stable than cedar in general.