Description. The Electric Strike Monitored (Fail Safe) enables the electrical release of a locked mechanical latch or bolt. The Monitored Electric Strike is extremely flexible and can be changed from power-to-lock or power-to-open, mounted on the left or right hand side of the door.
What is an electric strike used for?
Electric strikes replace a standard door strike and is connected to a power supply. When an electric strike is activated, it releases the latch, unlocking the door. Electric strike locks remain locked from the outside at all times. When the door closes behind you, it automatically returns to a locked position.
What is the difference between electric strike and magnetic lock?
The primary difference between electric strike locks (door strike) and magnetic locks (maglocks) is their power requirement. Maglocks are fail-safe, while electric strikes are generally fail-secure. In other words: Magnetic locks require power to lock the door, whereas electric locks require power to unlock the door.
Does an electric strike require a power supply?
Electric strikes require a power supply to function. Electric strikes have some type of keeper, or gate, for the latching mechanism on the lock. When a credential is presented and the strike is disengaged, the gate on the strike will allow the latch to be pulled through the gate.What is a fail secure electric strike?
This is an electric strike lock designed for wood, metal, and PVC doors. … In its fail-secure mode (normally open), the lock requires power in order to unlock. So in the event of a power outage, the door remains secure. In its fail-safe mode, the lock requires power to lock.
What is fail safe and fail secure?
Fail safe products are unlocked when power is removed. Power is applied to lock the door. Fail secure products are locked when power is removed. Power is applied to unlock the door. Fail safe/fail secure refers to the status of the secure side (key side, outside) of the door.
Are magnetic locks secure?
Maglocks require constant power to stay locked, making them fail-safe. That could lead to an unsecured opening in the event of a power outage. … They should be used on doors where entry security is a concern since they will remain locked during a power outage.
Do you need an electric hinge with an electric strike?
Your hinges must be compatible with other devices such as electrified mortise locks, electrified cylindrical locks, delayed egress exit devices, electric trim, and electric strikes for door pairs. Additionally, you’ll want to ensure hinge compatibility of power control inputs for electric locks.How much power does an electric strike use?
The fail safe electric strike will need . 51 amps at 12 volts to unlock.
How do electric door locks work?The lock system works just like a traditional lock – with a latch and a bolt. … Electronic door locks use something called actuators, which move the bolt of the lock into place so that they door can open. You simply have to trigger the actuator and your door will open.
Article first time published onAre mag locks fail secure?
Because mag locks by design require a constant supply of electricity to remain locked, mag locks are fail-safe only — they do not function to keep the door locked from either side when the power is out.
What is a cathode lock?
The cathode lock is the accessory product of the access control system. It is installed on the doorframe and used for locking the mechanical lock tongue. At present, FC series of cathode locks can be widely used in office buildings, wooden doors, stainless steel doors, fire doors, residential entrance doors.
What is a mortise deadlock?
Mortice deadlocks are the simplest. They only have a keyhole and a locking bolt that goes back and forth. A mortice sashlock, on the other hand, features a handle-operated latch mechanism. This means you can open and close the door without having to use the key, but can still lock the door when you leave the building.
What is Fail securely?
Failing to a secure mode means the application has not disclosed any data that would not be disclosed ordinarily, that the data still cannot be tampered with, and so on. Or you can fail insecurely such that the application discloses more than it should or its data can be tampered with (or worse).
Is Fail secure normally open?
Fail safe works like explained is a Normally Open device will release the door when power is lost. Fail Secure is a Normally Closed device and keeps the door locked until power is received.
How do I change from fail secure to fail-safe?
Changing From Fail-Secure to Fail-Safe: Place solenoid and plunger facing the side opposite of shuttle return spring into groove on the shuttle. (See page three for diagram) 3) Place retainer plate on top of solenoid and place latch, blocking arm & blocking arm return spring in original position.
Is a mag lock normally closed?
The button is Normally Closed. It also transfers continuous power to the mag lock positive wire. Now that the magnetic lock is energized, any valid card read, motion sensor movement or button depress will break Positive power and unlock the door. In this example, the motion breaks the mag lock power directly.
What is an electrified mortise lock?
Electrified Mortise Locks are simply standard mortise locks equipped with a solenoid that keeps the latchbolt from retracting (usually only from the unsecure side). … In fail-safe mode, power must be applied to lock the lock, whereas in the fail-secure mode power must be applied to unlock the lock.
How do you beat magnetic door locks?
To beat electromagnetic door locks, cut a 0.015-inch aluminum plate and secure it with adhesive on the strike plate. This would reduce the magnet lock’s holding force from over 1,200 pounds to approximately 300 pounds.
How does a magnetic door lock work?
Magnetic locks use electromagnetism to control the entire locking mechanism. When the magnet is energized, it bonds to the armature and locks the door. To allow access or egress, a switch must be provided to de-energize the magnet. As the electric power activates the magnet, the bolt locks the door.
What is a secure lock?
Secure lock settings will allow you to change certain security functions such as: … Lock network and security – You are able to keep network and security-related functions locked while your phone is locked. This makes it a lot easier to locate and protect if it is lost or stolen.
Why is fail-safe important?
Benefits of fail-safe designs include being able to manage the unexpected and mitigating damage if failure occurs. There is no method to help determine which if either of these philosophies should be employed. Engineers must use their judgment on a case-by-case basis.
Can you put an electric strike on a double door?
6100 Series Electric Strike The 6100 Series are heavy-duty stainless steel construction rim exit strikes. They are ideal for drop-in replacement or new construction with five models providing coverage for many single or double door applications, including fire-rated doors.
Is a strike plate necessary?
Strike Plate This is the plate the latch-tongue, or deadbolt-tongue will connect with. … Any passage or privacy set needs to have a strike plate for the door to latch. Additionally, deadbolts need a strike plate to properly lock.
What is a car door striker?
Door strikers are hooks or bolts that latch up the doors on a vehicle. … The striker plate is made of hardened metal that prevents wear when the door is open and shut many times each day. In addition, the striker plate also helps to hold up the vehicle’s door as the hinge pins wear.
Do you need an electric strike and electric lock?
Electric Strikes in Fire-Rated Openings For stairwell openings that must be unlocked in the event of a fire yet positively latched, the answer is simple: one must use an electric lock (or exit device trim) because there is no fail safe, fire-rated electric strike.
What is a door power transfer?
An EPT is an electrical power transfer, which is used to transfer wires from the door frame to the edge of the door. … The EPT is concealed when the door is closed (the door loop is exposed and prone to abuse) and it can accommodate larger gauge wires than an electric hinge.
What is a pivot hinge door?
A pivot door is a swinging door that rotates on a vertical axis, a spindle. This is different from regular hinged doors, where the hinges are attached to the side of the door and the adjacent wall. The difference between a pivot door and a regular hinged door.
How do you cut a strike plate for a door?
Place the strike plate against the frame. Center the hole on the plate over the lipstick mark. Score around the edges of the plate with a utility knife. Trace the hole on the strike plate onto the door frame with a pencil.
What wire is used for electric strike?
Stranded wire is the accepted standard wire type for connecting electric strikes.
What causes power door locks to stop working?
There are many issues that can cause your power locks to stop working: Your key fob is faulty or has a dead battery. … Many people stress about the functionality of their doors not realizing the only issue was the key fob. A fuse has been blown.
