Sometimes called floor or lower cabinets, base cabinets are the lower section of cabinetry that is installed on the floor. Makes sense, right? They are almost always capped off with a countertop of some sort, and are usually 24” deep and 36” high in American kitchens.
What is the bottom of a kitchen unit called?
Plinth (sometimes called a kickboard) is fitted at the bottom of the base cabinet and sits on the floor. It is usually between 60-200mm high. … More modern kitchens typically have a shorter plinth.
What is the base of a kitchen cabinet?
Height:84 inches, 90 inches and 96 inchesWidth:12 to 33 inches
What are the parts of a cabinet?
- Cabinet Face Frame. Cabinet face frames provide stability, keeping the cabinet box square during shipping and installation. …
- Doors and Drawer Fronts. Doors and drawer fonts are one of the most prominent cabinet parts. …
- Hinges. …
- Drawer Glides. …
- Drawer Box. …
- Interior Finish Material. …
- Cabinet Shelves.
What goes at the bottom of cabinets?
Light Rail Molding is used to finish the bottom of wall cabinets. It can function as a trim to conceal under-cabinet lighting fixtures and provide a barrier from the light glare, or simply serve as a decorative enhancement.
What is a kitchen plinth?
A plinth, or kickboard, is often added along he bottom edge of the base units, to make them appear to stand directly on the floor, and give the kitchen a solid finished look.
What is a cabinet plinth?
Plinths are sometimes referred to as kick board or kick plate and are used to bridge the gap between the floor and the bottom of your cabinets to hide away cabinet legs, cables, and pipes leaving your kitchen to look sleek and tidy.
What are the 5 parts of the cabinet door?
- Panel – The center section of a cabinet door. …
- Rail – The top and bottom pieces in the frame. …
- Stile – The left and right pieces in the frame.
- Outside Edge – The outside edge of the cabinet door. …
- Inside Edge – The inside edge of the cabinet frame.
What is a recessed bottom cabinet?
A recessed panel door is a cabinet door with a center panel that is slightly depressed. Recessed panel doors often include thinner wood than other types of cabinet doors. … This allows the material to be thin enough to sit inside the recessed area without changing the finished appearance of the wood.
What do you call the wood under kitchen cabinets?The plinth is the wooden panel that covers the area between the bottom of the base unit and the kitchen floor. It is also known as a kick plate or kick board.
Article first time published onWhat are standard cabinet depths?
Standard kitchen cabinet heights include 12, 15, 18, 30, 36 and 42 inches tall; depth ranges from 12 to 18 inches. Typically installed 18 inches above countertops, 54 inches above floor and 24 inches above stove.
What is a cabinet door called?
The cabinet door or drawer front fits inside the frame to create an even or “flush” look. The door or drawer front could be flush with the surrounding rails and stiles. Wood species:The wood species of your cabinets refers to the type of wood used to construct their components.
What is drawer base cabinet?
Drawer base cabinets include a cabinet door that opens to a compartment and has a single drawer at the top end. Drawer base cabinets have a sliding draw set that’s practical because of its storage versatility.
What is under cabinet molding called?
Molding at the bottom of the base cabinet doors and above the toe kick is also known as bottom molding. This molding can be used on kitchen islands to make them appear more like furniture.
Do kitchen cabinets sit on subfloor?
There is no definitive answer about whether you should install cabinets on the subfloor or the finished floor. Ultimately, whether your kitchen cabinets should sit on the subfloor depends on several factors, including: The type of flooring you’re installing. The type of cabinets you’ll be installing.
What is a cabinet Stile?
Stile – The vertical-framing members of a cabinet face frame or cabinet door.
What is the trim on top of cabinets called?
Crown molding is decorative trim that is added to the top of your cabinets. The benefit of installing crown molding is that it draws the eye upward, showcasing the elegance of your cabinets. Crown molding can either bond with the ceiling or allow for space above the cabinet.
What is a kitchen fascia?
Fascia is typically any piece of wood used to finish off the front edge of a countertop on a set of base cabinets. Its face can be left exposed to highlight the wood’s grain patterns or it may be covered with a plastic laminate or tile.
What is plinth in building?
plinth, Lowest part, or foot, of a pedestal, podium, or architrave (molding around a door). It can also refer to the bottom support of a piece of furniture or the usually projecting stone coursing that forms a platform for a building.
What is another word for plinth?
supportbasestandplatformpedestaldaispodiumpropsubstructurefoundation
What is the difference between a plinth and a pedestal?
‘plinth’ is technical term but not as rare as socle. it is a low base, the bottom slab on which a column rests. ‘pedestal’ is a common term definitely something you put a statue on, but also metaphorically for putting something aspirational on.
What are kitchen plinths made of?
Also known as kitchen kickboards, these melamine faced boards fill what would otherwise be an unsightly gap between the bottom of your cupboards and the floor. We are able to manufacture made to measure kitchen plinths bespoke to the sizes you require.
Why is there a gap under my cabinets?
What’s most likely happening is there is an opening in your drywall behind the cabinets for plumbing or electrical that the installers did not seal, and that is your source of cold air. Since getting to that is near impossible (without dismantling the cabinets) your’re going to have to settle for plugging the gap.
What is a cabinet toe kick?
A toe kick is the recessed space on a lower cabinet that offers room for – you guessed it – your toes. These few inches enable your feet to rest comfortably under a small section of the cabinet, allowing you to get closer to the countertop without having to hunch over.
What is toe kick made of?
They’re usually made of paint grade 3/4” plywood and can be assembled in the shop. They’re quick to install and level on site using support blocks made from scrap plywood and cedar shims. This is the preferred method for kicks on the custom cabinets that I deal with everyday.
What is a cabinet door frame?
Framed Cabinetry Framed cabinets are the more traditional, “American-type” cabinet that features a face frame that is attached to the front of each cabinet. The door hinges (exposed or concealed) attach to the face frame. Most framed cabinets are made from particle board or plywood.
What is a cabinet trim?
Cabinet moulding, sometimes spelled cabinet molding, is a long, narrow decorative piece of wood that is used to give cabinetry a customized look. It can be used to cover the space between the cabinets and the ceiling, installed atop or below a cabinet, or inserted into the cabinet front.
What is the inside of a drawer called?
Drawer Face Can also be called the drawer front.
What is a kitchen soffit?
A kitchen soffit is usually a boxy structure built to hide wiring, pipes, or other mechanicals, or to fill the space between the top of your cabinets and the ceiling. … Soffits can make a kitchen feel dated and closed-in.
How deep are bottom kitchen cabinets?
A standard base cabinet should be 24 inches or 61 cm in depth. Since refrigerator manufacturers now make deeper fridges, it directly creates a need for deeper countertops or cabinets. If your kitchen isn’t too large, there are base cabinets as small as 12 inches in depth which can fit into tiny spaces in the kitchen.
What is the depth of lower cabinets?
Depth: The depth of base cabinets without the countertop typically measures 24 inches. Adding the countertop will create an overhang between one to two inches.
