Where is the gas shut off valve

Your main shut off valve is located just before the gas meter. This is called your “street side valve”. On the inside of your house, where the pipe enters your house, you can find your “house side valve.” This ball valve is attached to a black iron pipe.

Where do I find my gas shut off valve?

Your main shut off valve is located just before the gas meter. This is called your “street side valve”. On the inside of your house, where the pipe enters your house, you can find your “house side valve.” This ball valve is attached to a black iron pipe.

Do houses have a gas shut off valve?

Houses with natural gas have a main shutoff valve (Fig. A) located just before the gas meter. This valve, often called the street-side valve, is normally a rectangular nub (Photo 1). When the long side of the nub or handle is parallel to the incoming gas line, it’s open and the gas is flowing.

What does a gas main shut off valve look like?

Main Gas Shutoff Valves The valve will usually look like a small rectangle, and you’ll need a special wrench to turn it. When it’s open, the long side is parallel to the incoming gas pipe. To stop the flow of gas, close the valve by turning it perpendicular to the incoming line.

How do you know if a valve is open or closed?

Ball valves are perhaps the easiest valve to see if they are open or closed. If the handle on top is parallel to the valve, it’s open. Likewise, if the handle is perpendicular to the top, the valve is closed.

Where is my gas shut off valve UK?

The gas safety shut-off valve is located at your meter. If your meter is not located outside in a meter box, other common locations include: Under the stairs. Beneath the kitchen sink.

Can I turn my gas back on myself?

Once the valve is turned off, do not turn it back on by yourself. It must be turned on by a gas company technician. The gas company will likely perform a pressure test on the system and relight all pilot lights in the house as part of turning the gas back on.

Which way closes a valve?

When it comes to which way you should turn the valve, keep in mind the old saying “righty tighty, lefty loosy.” In other words, turning a valve clockwise, or to the right, will restrict the flow of water while turning it counterclockwise, or to the left, will allow water to flow.

Where is fireplace gas valve?

Gas fireplace: The shut-off for a gas fireplace is typically on the control panel. This control panel can be found behind the front screen, where a knob that controls the flow of gas can be turned to ‘off’.

How do shut off valves work?

Shut off valves function with a second type of actuation which is the normally closed version. This valve is held in the closed position by a piston or by two pistons for the larger shut off valves. Once again, air pressure is applied but in this case the valve opens when air pressure is applied.

Article first time published on

How do you turn off a gate valve?

Gate valves close by turning the wheel clockwise until the water is off. Ball valves close by turning the straight handle a quarter turn clockwise until the water is off.

How do I turn my gas back on after disconnecting?

You are going to need a wrench or gas shut off tool to do this. Very slowly, turn the meter back into the on position. The lever should be in line with the pipe after making a ninety-degree turn. Finally, you can re-light any of the pilot lights in your appliances.

How do I reconnect my gas?

1. Safety first. Make sure all your gas appliances are turned off.
2. When your gas meter is ready to connect, it’ll say PUSH TO RECONNECT.
3. Press any button, and it’ll automatically begin to reconnect (this may take a few minutes).

Who is responsible for the gas supply pipe?

The property owner is responsible for maintaining internal pipes leading from the meter to gas appliances such as boilers, cookers and heaters and for making sure all gas appliances in the property are checked and serviced annually.

How do I turn on my gas fireplace valve?

1. Place a long lighter next to the burner and pull the fuel trigger. (You can also use a lit match.) …
2. Turn the key in the slot to open the gas valve. You may hear the hiss of gas entering the burner. …
3. Replace the key cover.
4. Use the key to control the height of the flames.

Do gas fireplaces need a shut off valve?

As adopted and amended by 248 CMR, NFPA 54, National Fuel and Gas Code, outlines specific requirements for natural gas appliances such as outdoor fireplaces and grills. One such requirement is the need for an accessible, approved manual shutoff valve approved by the AHJ prior to installation.

Where is the pilot light on a gas fireplace?

Locate the gas control dial. Just above it, you should see a red or black button. Press the button once or twice to verify that there is a spark at the end of the pilot tube. If you don’t see a button, you must light the flame manually.

Why isn't my gas fireplace lighting?

If gas is coming out of the pilot, but it still won’t light, the spark igniter could be the problem. Alleyne says to look for and clear out any debris between the igniter and thermocouple. … The pilot lighting, but not staying lit, indicates that the thermocouple is worn out, Worthen says.